deleted deleted

deleted deleted   •   about 6 years ago


When I press the button in various ways I don't see it light up at all. Is it supposed, even when not paired with a phone?

Also, I can't seem to get the battery out. I'm twisting one side of it counter-clockwise like the mini-manual says. Is there some kind of trick to this?


  • Manager   •   about 6 years ago

    A simple press will not light up the LED.
    A press and hold will, as described in the dev guide.

    To remove the battery some force is needed, you may not feel when you untwisted it.

    Let us know if you were able to do this.

  • Manager   •   about 6 years ago

    roschler, our button is designed to always advertise after it is disconnected. The battery life, if using well known brand batteries, should be about 12 months.
    Things like connecting and disconnecting, and pressing the buttons etc will shorten the battery life.

    You may force the device to go into standby mode by pressing the button 25 seconds, the device will beep and flash led rapidly...after the led stops flashing the device should be in standby mode, and hence not advertising.

Comments are closed.